--- title: "Enabling or disabling file inspection using the CLI" slug: "enabling-or-disabling-file-inspection-using-the-cli" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-09-12T20:42:23Z published: 2026-09-12T20:42:23Z canonical: "docs.trellix.com/enabling-or-disabling-file-inspection-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling or disabling file inspection using the CLI Use the CLI commands in this procedure to enable or disable file inspection and to view whether the file inspection feature is enabled. You can enable file inspection using the CLI only. **Prerequisites** - Administrator or Operator access to the Network Security appliance **To enable file inspection:** 1. Go to CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Enable file inspection: ``` hostname (config) # bottracker file-inspect enable ``` 3. Save your changes. ``` hostname (config) # write memory ``` **To disable file inspection:** 1. Go to CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Disable file inspection. ``` hostname (config) # no bottracker file-inspect enable ``` 3. Save your changes. ``` hostname (config) # write memory ``` **To view the status of file inspection:** 1. Go to CLI enable mode. ``` hostname > enable ``` 2. View the status. ``` hostname # show bottracker file-inspect status ```