--- title: "Enabling or disabling filter analysis using the CLI" slug: "enabling-or-disabling-filter-analysis-using-the-cli-1" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Customer", "Network Security"] updated: 2026-09-07T21:14:23Z published: 2026-09-07T21:14:23Z canonical: "docs.trellix.com/enabling-or-disabling-filter-analysis-using-the-cli-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling or disabling filter analysis using the CLI Follow these steps to enable or disable filter analysis on the Malware Analysis appliance. **To enable filter analysis:** 1. Enter the CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Enable filter analysis on the appliance. ``` hostname (config) # filter-analysis enable ``` 3. Verify that filter analysis is enabled on the appliance. 4. ``` hostname (config) # show filter-analysis config  Filter Analysis enabled                : yes    Create job enabled                   : yes    JABE enabled                         : yes    SA-Python enabled                    : yes ``` **To disable filter analysis:** 1. Enter the CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Disable filter analysis on the appliance. ``` hostname (config) # no filter-analysis enable ``` 3. Verify that filter analysis is disabled on the appliance. 4. ``` hostname (config) # show filter-analysis config  Filter Analysis enabled                : no    Create job enabled                   : yes    JABE enabled                         : yes    SA-Python enabled                    : yes ```