--- title: "Enabling or disabling forensic analysis integration with a Packet Capture platform using the CLI" slug: "enabling-or-disabling-forensic-analysis-integration-packet-capture-cli" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-09-12T20:42:33Z published: 2026-09-12T20:42:33Z canonical: "docs.trellix.com/enabling-or-disabling-forensic-analysis-integration-packet-capture-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling or disabling forensic analysis integration with a Packet Capture platform using the CLI Follow these steps to enable or disable forensic analysis integration with a Packet Capture platform. **To enable forensic analysis integration with a Packet Capture platform:** 1. Enable the CLI configuration mode. ``` hostname > enable ``` ``` hostname # configure terminal ``` 2. Enable the integration with a Packet Capture platform on the appliance. ``` hostname (config) # px integration enable ``` 3. Verify the status of the integration with a Packet Capture platform. ``` hostname (config) # show px integration ``` ``` PX Analysis State ``` ``` ----------------------------- ``` ``` Licensed subfeature:      yes ``` ``` Administratively enabled: yes ``` ``` Operationally enabled:    yes ``` 4. Save your changes. ``` hostname (config) # write memory ``` ``` Saving configuration file ... Done! ``` **To disable forensic analysis integration with a Packet Capture platform:** 1. Enable the CLI configuration mode. ``` hostname > enable ``` ``` hostname # configure terminal ``` 2. Disable the integration with a Packet Capture platform on the appliance. ``` hostname (config) # no px integration enable ``` 3. Verify the status of the integration with a Packet Capture platform. ``` hostname (config) # show px integration ``` ``` PX Analysis State ``` ``` ----------------------------- ``` ``` Licensed subfeature:      yes ``` ``` Administratively enabled: no ``` ``` Operationally enabled:    no ``` 4. Save your changes. ``` hostname (config) # write memory ``` ``` Saving configuration file ... Done! ```