--- title: "Enabling or disabling ICAP blocking mode using the Web UI" slug: "enabling-or-disabling-icap-blocking-mode-using-the-web-ui" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-09-12T20:42:23Z published: 2026-09-12T20:42:23Z canonical: "docs.trellix.com/enabling-or-disabling-icap-blocking-mode-using-the-web-ui" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling or disabling ICAP blocking mode using the Web UI To enable or disable ICAP blocking mode using the Web UI, use the ICAP Settings page. ![NX_ICAPSettingsBlockmodeEnable_scap.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-3ae34e48-0d7b-fba1-75a4-12d8d099752d.png?sv=2026-02-06&spr=https&st=2026-11-20T03%3A35%3A10Z&se=2026-11-20T04%3A35%3A10Z&sr=c&sp=r&sig=XhM88d1w9Uqz9apZCaj55nxmNTBYAs5QwbLDa2QDbaI%3D) Prerequisites - Administrator access to the Network Security appliance - The ICAP service is enabled on the appliance. For details, see [Enabling or disabling the ICAP service](/network-and-platform/docs/enabling-or-disabling-the-icap-service-2). **To enable ICAP blocking mode:** 1. Choose **Settings > ICAP**. 2. Make sure the **ICAP Service** toggle button displays "ON" to show that the Network Security appliance can act as an ICAP server to perform detection on ICAP-encapsulated data. 3. Click the **Blocking Mode** toggle button. The toggle button display changes from “OFF” to "ON" to show that the ICAP-enabled Network Security appliance can block REQMOD and RESPMOD requests from ICAP clients if a potential threat is detected. 4. Click **Update**. **To disable ICAP blocking mode:** 1. Choose **Settings > ICAP**. 2. Click the **Blocking Mode** toggle button. The toggle button display changes from “ON” to "OFF" to show that that the ICAP-enabled Network Security appliance does not block REQMOD and RESPMOD requests from ICAP clients if a potential threat is detected. 3. Clear the **Response Modification** checkbox. 4. Click **Update**.