--- title: "Enabling or disabling ICAP service using the Web UI" slug: "enabling-or-disabling-icap-service-using-the-web-ui" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-09-12T20:42:33Z published: 2026-09-12T20:42:33Z canonical: "docs.trellix.com/enabling-or-disabling-icap-service-using-the-web-ui" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling or disabling ICAP service using the Web UI To enable or disable the ICAP service on a supported Network Security appliance using the Web UI, use the ICAP Settings page. ![NX_ICAPSettingsEnable_scap.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-57659a15-2df8-b0ca-4971-5080c924d4e4.png?sv=2026-02-06&spr=https&st=2026-11-20T03%3A35%3A16Z&se=2026-11-20T04%3A35%3A16Z&sr=c&sp=r&sig=InqQ2SGy1a2c5%2FcBu208k%2Btyd8kXNxZZlgtviUjUkp8%3D) *Prerequisites* - Administrator access to the Network Security appliance. **To enable the ICAP service:** 1. Choose **Settings > ICAP**. 2. Click the **ICAP Service** toggle button. The toggle button displays "ON" to show that the Network Security appliance can act as an ICAP server to perform detection on ICAP-encapsulated data. 3. Click **Update**. 4. Make sure the third-party device is configured so that the device can act as an ICAP client. For details, see [ICAP client configuration prerequisites](/network-and-platform/docs/icap-client-configuration-prerequisites-2). **To disable the ICAP service:** 1. Choose **Settings > ICAP**. 2. Click the **ICAP Service** toggle button. The toggle button displays "OFF" to show that the Network Security appliance cannot act as an ICAP server to perform detection on ICAP-encapsulated data. 3. Click **Update**.