--- title: "Enabling or disabling the LDAP server for certificate authorization using the CLI" slug: "enabling-or-disabling-ldap-server-certificate-authorization-cli-1" tags: ["File Protect (FX)", "Malware Analysis (AX)", "IAM", "Email Security - Cloud", "Network Security (NX)", "Email Security — Server", "Central Management System", "Helix Enterprise", "Endpoint Security (HX)", "Product Usage", "Install and Get Started", "Helix", "Intelligent Virtual Execution "] updated: 2026-09-01T19:03:12Z published: 2026-09-01T19:03:12Z canonical: "docs.trellix.com/enabling-or-disabling-ldap-server-certificate-authorization-cli-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling or disabling the LDAP server for certificate authorization using the CLI Use the CLI commands in this section to enable or disable the LDAP server that is used to authorize users that are already authenticated using the X.509 certificate. To enable the LDAP server for certificate authorization: 1. Go to CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Enable the LDAP server to map a remote user to a local user account for certificate-based authentication. ``` hostname (config) # aaa authorization certificate map-ldap enable ``` 3. Verify the status of the LDAP server. ``` hostname (config) # show aaa authorization certificate ``` ``` Certificate based authorization settings: ``` ```  LDAP enabled                     : yes ``` ```  ..... ``` 4. Save your changes. ``` hostname (config) # write memory ``` To disable the LDAP server for authorization: 1. Go to CLI configuration mode. ``` hostname > enable ``` ``` hostname # configure terminal ``` 2. Disable the LDAP server that is used for authorization. ``` hostname (config) # no aaa authorization certificate map-ldap enable ``` 3. Verify the status of the LDAP server. ``` hostname (config) # show aaa authorization certificate ``` ``` Certificate based authorization settings: ``` ```  LDAP enabled                     : no ``` ```  ..... ``` 4. Save your changes. ``` hostname (config) # write memory ``` :