--- title: "Enabling or disabling OCSP using the CLI" slug: "enabling-or-disabling-ocsp-using-the-cli-1" tags: ["File Protect (FX)", "Malware Analysis (AX)", "IAM", "Email Security - Cloud", "Network Security (NX)", "Email Security — Server", "Central Management System", "Helix Enterprise", "Endpoint Security (HX)", "Product Usage", "Install and Get Started", "Helix", "Intelligent Virtual Execution "] updated: 2026-09-01T19:03:07Z published: 2026-09-01T19:03:07Z canonical: "docs.trellix.com/enabling-or-disabling-ocsp-using-the-cli-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling or disabling OCSP using the CLI Use the CLI commands in this section to enable or disable the Online Certificate Status Protocol (OCSP) so that the appliance can verify the status of the certificate revocation. When OCSP is enabled and the appliance cannot reach the OCSP server, the user is denied access to the Web UI. ### Note OCSP is enabled by default. To enable OCSP: 1. Go to CLI configuration mode. ``` hostname > enable ``` ``` hostname # configure terminal ``` 2. Enable OCSP for certificate authentication. ``` hostname (config) # aaa authentication certificate ocsp enable ``` 3. Verify the status of OCSP. ``` hostname (config) # show aaa authentication certificate ``` ``` Certificate based authentication settings: ``` ```  Web Policy                     : required ``` ```  Certificate field for username : x509-cert-subject-cn ``` ```  CA certificate bundle          : client-cert-auth ``` ``` OCSP enabled                   : yes ``` ```  ... ``` 4. Save your changes. ``` hostname (config) # write memory ``` To disable OCSP: 1. Go to CLI configuration mode. ``` hostname > enable ``` ``` hostname # configure terminal ``` 2. Disable OCSP for certificate authentication. ``` hostname (config) # no aaa authentication certificate ocsp enable ``` 3. Verify the status of OCSP. ``` hostname (config) # show aaa authentication certificate ``` ``` Certificate based authentication settings: ``` ```  Web Policy                     : required ``` ```  Certificate field for username : x509-cert-subject-cn ``` ```  CA certificate bundle          : client-cert-auth ``` ```  OCSP enabled                   : no ``` ```   ... ``` 4. Save your changes. ``` hostname (config) # write memory ``` :