--- title: "Enabling or disabling the policy settings of the Web UI for certificate authentication using the CLI" slug: "enabling-or-disabling-policy-settings-web-ui-certificate-authentication-cli-1" tags: ["File Protect (FX)", "Malware Analysis (AX)", "IAM", "Email Security - Cloud", "Network Security (NX)", "Email Security — Server", "Central Management System", "Helix Enterprise", "Endpoint Security (HX)", "Product Usage", "Install and Get Started", "Helix", "Intelligent Virtual Execution "] updated: 2026-09-01T19:03:12Z published: 2026-09-01T19:03:12Z canonical: "docs.trellix.com/enabling-or-disabling-policy-settings-web-ui-certificate-authentication-cli-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling or disabling the policy settings of the Web UI for certificate authentication using the CLI ### Important X.509‑based authentication is mutually exclusive with OIDC‑based authentication. If Trellix IAM or single sign‑on (SSO) authentication are configured, do not enable CAC or PIV authentication. Trellix IAM uses the OpenID Connect (OIDC) identity layer on top of the OAuth 2.0 protocol to manage sessions between end users and their resources, and SSO authentication requires Trellix IAM. See [IAM overview](/docs/iam-overview) and [SSO authentication overview](/docs/sso-authentication-overview). Use the CLI commands in this section to enable or disable the policy settings of the Web UI to authenticate users using a X.509 certificate. ### Note Use the` no aaa authentication certificate web policy `command to reset the policy not to accept a certificate for user authentication. To enable the policy settings of the Web UI for certificate authentication: 1. Go to CLI configuration mode. ``` hostname > enable ``` ``` hostname # configure terminal ``` 2. Enable users to log in to Web UI for certificate authentication. - To accept an optional X.509 certificate: ``` hostname (config) # aaa authentication certificate web policy allowed ``` ### Note Users log in to the Web UI either using the user name and password provided by their administrator or using an optional X.509 certificate. - To use only a client X.509 certificate: ``` hostname (config) # aaa authentication certificate web policy required ``` 3. Verify the status of the policy settings of the Web UI. ``` hostname (config) # show aaa authentication certificate ``` ``` Certificate based authentication settings: ``` ```  Web Policy                     : required ``` ```  ..... ``` 4. Save your changes. ``` hostname (config) # write memory ``` To disable the policy settings of the Web UI to not accept a certificate: 1. Go to CLI configuration mode. ``` hostname > enable ``` ``` hostname # configure terminal ``` 2. Disable the policy settings of the Web UI to not accept a client X.509 certificate. ``` hostname (config) # aaa authentication certificate web policy disabled ``` 3. Verify the status for the policy settings of the Web UI. ``` hostname (config) # show aaa authentication certificate ``` ``` Certificate based authentication settings: ``` ```  Web Policy                     : disabled ``` ```  ..... ``` 4. Save your changes. ``` hostname (config) # write memory ``` :