--- title: "Enabling or disabling pre-filter analysis using the CLI" slug: "enabling-or-disabling-pre-filter-analysis-using-the-cli-3" tags: ["Product Usage", "FX 10.x", "AX 10.x", "NX 10.x", "Customer", "Network Security"] updated: 2026-09-07T21:29:17Z published: 2026-09-07T21:29:17Z canonical: "docs.trellix.com/enabling-or-disabling-pre-filter-analysis-using-the-cli-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling or disabling pre-filter analysis using the CLI Follow these steps to enable or disable pre-filter analysis on the Malware Analysis appliance. **To enable pre-filter analysis:** 1. Enter the CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Enable pre-filter analysis for PDF files on the appliance. ``` filter-analysis filetype pdf enable ``` 3. Enable pre-filter analysis for XLS files on the appliance. ``` filter-analysis filetype xls enable ``` 4. Verify that pre-filter analysis is enabled on the appliance. ``` hostname (config) # show filter-analysis config Filter Analysis enabled              : yes Create job enabled                   : yes JABE enabled                         : yes SA-Python enabled                    : yes Pre-filter Analysis enabled         : pdf,xls ``` **To disable pre-filter analysis:** 1. Enter the CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Disable pre-filter analysis for PDF files on the appliance. ``` no filter-analysis filetype pdf enable Filetype pdf Prefilter disabled successfully ``` 3. Disable pre-filter analysis for XLS files on the appliance. ``` no filter-analysis filetype xls enable Filetype xls Prefilter disabled successfully ``` 4. Verify that pre-filter analysis is disabled on the appliance. ``` hostname (config) # show filter-analysis config Filter Analysis enabled              : yes Create job enabled                   : yes JABE enabled                         : yes SA-Python enabled                    : yes Pre-filter Analysis enabled         : ```