--- title: "Enabling or disabling riskware detection policy rules using the Web UI" slug: "enabling-or-disabling-riskware-detection-policy-rules-using-the-web-ui" updated: 2026-09-08T21:45:37Z published: 2026-09-08T21:45:37Z canonical: "docs.trellix.com/enabling-or-disabling-riskware-detection-policy-rules-using-the-web-ui" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling or disabling riskware detection policy rules using the Web UI Use the **Riskware Policy Settings** page to enable or disable riskware detection policy rules on the File Protect appliance using the Web UI. ![EX_RiskwareCustomEnableDisable_scap.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-b5d4b999-27e3-d003-6bd0-af8fc084e89f(1).png?sv=2026-02-06&spr=https&st=2026-11-20T04%3A03%3A25Z&se=2026-11-20T05%3A03%3A25Z&sr=c&sp=r&sig=eYnKelC87eM4U22zSMZN4XBC1nhtt01QyeDD313L6zI%3D)To enable riskware detection policy rules: 1. In the Web UI, choose **Settings** > **Riskware Policy**. 2. In the **FireEye Riskware Rules** table, select the checkbox in the **Alert Only** column for the policy rule you want to enable for riskware detection. You can select multiple rules at one time. 3. Click **Apply**. 4. ``` The following message is displayed: ``` ``` Updated selected Riskware Rules. ``` To disable riskware detection policy rules: 1. In the Web UI, choose **Settings** > **Riskware Policy**. 2. In the **FireEye Riskware Rules** table, clear the checkbox in the **Alert Only** column for the policy rule you want to disable for riskware detection. You can select multiple rules at one time. 3. Click **Apply**. The specified policy rules for riskware detection are disabled. 4. If the Trellix Riskware (Adware/PUP/Spam) rules are left unchecked, click **Yes** to confirm. 5. The following message is displayed: ``` Updated selected Riskware Rules. ``` :