--- title: "Enabling or disabling SSL interception using the CLI" slug: "enabling-or-disabling-ssl-interception-using-the-cli" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-09-12T20:42:23Z published: 2026-09-12T20:42:23Z canonical: "docs.trellix.com/enabling-or-disabling-ssl-interception-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling or disabling SSL interception using the CLI Use the commands in this section to enable or disable SSL interception on one or more network port pairs. **To enable SSL interception on a network port pair:** 1. Go to CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Enable SSL interception on a port pair. ``` hostname (config) # policymgr interfacessl-intercept enable ``` where `<port-pair-name>` specifies the designation that is configured on the appliance interface. 3. Repeat the previous step for each port pair on which you want to enable SSL interception. 4. Save your changes. ``` hostname (config) # write memory ``` 5. Verify the status of SSL interception. ``` hostname (config) # show policymgr ssl-intercept SSL-Intercept Configuration:         ssl intercept inbound min_version: TLSv1.0         ssl intercept inbound cipher list: original         ssl intercept inbound trusted cert name: SSLi         ssl intercept inbound untrusted cert name: system-self-signed         ssl intercept outbound min version: TLSv1.0         ssl intercept outbound cipher list: compatible         ssl intercept tcp port: 443 Interface A         ssl intercept enable: no Interface B         ssl intercept enable: yes Interface C         ssl intercept enable: yes Interface D         ssl intercept enable: no ``` The "ssl intercept enable" line displays "yes" if SSL interception is enabled on each port pair. **To disable SSL interception on a network port pair:** 1. Go to CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Disable SSL interception on a port pair. ``` hostname (config) # no policymgr interfacessl-intercept enable ``` where `<port-pair-name>` specifies the designation that is configured on the appliance interface. 3. Repeat the previous step for each port pair on which you want to disable SSL interception. 4. Save your changes. ``` hostname (config) # write memory ``` 5. Verify the status of SSL interception. ``` hostname (config) # show policymgr ssl-intercept SSL-Intercept Configuration:         ssl intercept inbound min_version: TLSv1.0         ssl intercept inbound cipher list: original         ssl intercept inbound trusted cert name: SSLi         ssl intercept inbound untrusted cert name: system-self-signed         ssl intercept outbound min version: TLSv1.0         ssl intercept outbound cipher list: compatible         ssl intercept tcp port: 443 Interface A         ssl intercept enable: no Interface B         ssl intercept enable: no Interface C         ssl intercept enable: yes Interface D         ssl intercept enable: n ``` The "ssl intercept enable" line displays "no" if SSL interception is disabled on each port pair.