--- title: "Enabling or disabling the CM Peer Service using the CLI" slug: "enabling-or-disabling-the-cm-peer-service-using-the-cli-3" updated: 2026-08-25T21:18:03Z published: 2026-08-25T21:18:03Z canonical: "docs.trellix.com/enabling-or-disabling-the-cm-peer-service-using-the-cli-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling or disabling the CM Peer Service using the CLI Follow these steps to enable or disable the CM Peer Service using the CLI. To enable the CM Peer Service: 1. Go to CLI configuration mode. ``` CMS1 > enable ``` ``` CMS1 # configure terminal ``` 2. Enable CM Peer Service on the platform. ``` CMS1 (config) # cms feature peer-service enable ``` 3. Verify the status of the CM Peer Service. ``` CMS1 (config) # show cms peer-service ``` ``` CMS peer-service enabled:          yes ``` 4. Repeat this procedure for each CM peer. To disable the CM Peer Service: 1. Go to CLI configuration mode. ``` CMS1 > enable ``` ``` CMS1 # configure terminal ``` 2. Disable CM Peer Service on the Central Management System appliance. ``` CMS1 (config) # no cms feature peer-service enable ``` 3. Verify the status of the CM Peer Service. ``` CMS1 (config) # show cms peer-service ``` ``` CMS peer-service enabled:          no ``` 4. Repeat this procedure for each CM peer. :