--- title: "Enabling or disabling the drop filter settings using the CLI" slug: "enabling-or-disabling-the-drop-filter-settings-using-the-cli" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-09-12T20:42:33Z published: 2026-09-12T20:42:33Z canonical: "docs.trellix.com/enabling-or-disabling-the-drop-filter-settings-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling or disabling the drop filter settings using the CLI Use the CLI commands in this procedure to enable or disable each type of drop filter setting. > [!NOTE] > Note > > You must use the **policymgr interface re-configure** command for the changes to take effect. **To enable each type of drop filter setting on an appliance interface:** 1. Enable the CLI configuration mode. ``` hostname > enable ``` ``` hostname # configure terminal ``` 2. Enable sending a TCP reset message for the relevant operational mode. ``` hostname (config) # policymgr interface drop tcp reset enable ``` where `<port-pair-name>` specifies the designation (A or B) that is configured on the appliance interface. 3. Enable sending a TCP reset message to the client for the relevant operational mode. ``` hostname (config) # policymgr interface drop tcp reset client enable ``` where `<port-pair-name>` specifies the designation (A or B) that is configured on the appliance interface. 4. Enable sending a TCP reset message to the server for the relevant operational mode. ``` hostname (config) # policymgr interface drop tcp reset server enable ``` where `<port-pair-name>` specifies the designation (A or B) that is configured on the appliance interface. 5. Enable sending an icmp-port-unreachable message to the sender for the relevant operational mode. `hostname (config) # policymgr interface <port-pair-name> drop udp icmpport-unreachable enable` where `<port-pair-name>` specifies the designation (A or B) that is configured on the appliance interface. 6. Specify when a specific A or B monitoring interface is configured for out-of-band tap mode blocking with TCP reset, UDP, or HTTP-enabled. - To specify blocked packets that are sent on outbound traffic by the Network Security appliance to the ether1 management interface: ``` hostname (config) # policymgr interface drop out-interface ether1 ``` where `<port-pair-name>` specifies the designation (A or B) that is configured on the appliance interface. - To specify blocked packets that are sent on outbound traffic by the Network Security appliance to the ether2 management interface: ``` hostname (config) # policymgr interface drop out-interface ether2 ``` where `<port-pair-name>` specifies the designation (A or B) that is configured on the appliance interface. 7. Enable posting an HTTP comfort page to the HTTP requester. ``` hostname (config) # policymgr interface drop http comfort-page enable ``` where `<port-pair-name>` specifies the designation (A or B) that is configured on the appliance interface. 8. Specify a comfort page message. - To specify an access-denied (response type 401) message: ``` hostname (config) # policymgr interface drop http comfort-page response-type access-denied [message ] ``` where `<port-pair-name>` specifies the designation (A or B) that is configured on the appliance interface and `<message>` (optional) specifies the text of the message. - To specify an access-forbidden (response type 403) message: ``` hostname (config) # policymgr interface drop http comfort-page response-type access-forbidden [message ] ``` where `<port-pair-name>` specifies the designation (A or B) that is configured on the appliance interface and `<message>` (optional) specifies the text of the message. 9. Reapply the configuration to the specified interface. ``` hostname (config) # policymgr interface re-configure ``` ``` where specifies the designation (A or B) that is configured on the appliance interface. ``` 10. Verify the status of the drop filter configuration settings. ``` hostname (config) # show policymgr drop configuration Policy drop filter configuration: ... HTTP Comfort Page: Enabled        : yes Type           : access-denied Message        : The page you are trying to access, http://%U, has a potential threat detected. TCP Reset        : Enabled        : yes to Server      : yes to Client      : yes UDP ICMP Port-Unreachable: Enabled        : yes ``` 11. Save your changes. ``` hostname (config) # write memory ``` ``` Saving configuration file ... Done! ``` **To disable each type of drop filter setting on an appliance interface:** 1. Enable the CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Disable sending a TCP reset message for the relevant operational mode. ``` hostname (config) # no policymgr interface drop tcp reset enable ``` where `<port-pair-name>` specifies the designation (A or B) that is configured on the appliance interface. 3. Disable sending a TCP reset message to the client for the relevant operational mode. ``` hostname (config) # no policymgr interface drop tcp reset client enable ``` where `<port-pair-name>` specifies the designation (A or B) that is configured on the appliance interface. 4. Disable sending a TCP reset message to the server for the relevant operational mode. ``` hostname (config) # no policymgr interface drop tcp reset server enable ``` where `<port-pair-name>` specifies the designation (A or B) that is configured on the appliance interface. 5. Disable sending an icmp-port-unreachable message to the sender for the relevant operational mode. ``` hostname (config) # no policymgr interface drop udp icmpport-unreachable enable ``` where `<port-pair-name>` specifies the designation (A or B) that is configured on the appliance interface. 6. Disable posting an HTTP comfort page to the HTTP requester. ``` hostname (config) # no policymgr interface drop http comfort-page enable ``` where `<port-pair-name>` specifies the designation (A or B) that is configured on the appliance interface. 7. Verify the status of the drop filter configuration settings. ``` hostname (config) # show policymgr drop configuration Policy drop filter configuration: ... HTTP Comfort Page: Enabled        : no Type           : access-denied Message        : The page you are trying to access, http://%U, has a potential threat detected. TCP Reset        : Enabled        : no to Server      : no to Client      : no UDP ICMP Port-Unreachable: Enabled        : no ``` 8. Save your changes. ``` hostname (config) # write memory ``` ``` Saving configuration file ... Done! ```