--- title: "Enabling or disabling the FAUDE local intel feed" slug: "enabling-or-disabling-the-faude-local-intel-feed-1" updated: 2026-09-08T23:23:18Z published: 2026-09-08T23:23:18Z canonical: "docs.trellix.com/enabling-or-disabling-the-faude-local-intel-feed-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling or disabling the FAUDE local intel feed Use the commands in this topic to enable or disable the FAUDE local intel feed on an appliance with a one-way sharing Content Updates license. ### Note The FAUDE local intel feed is enabled by default. To enable the FAUDE local intel feed: 1. Go to CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Enable the feed: ``` hostname (config) # analysis faude-feed enable ``` 3. Verify your change: ``` hostname (config) # show analysis url-policy ``` 4. Save your change: ``` hostname (config) # write memory ``` To disable the FAUDE local intel feed: 1. Go to CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Disable the feed: ``` hostname (config) # no analysis faude-feed enable ``` 3. Verify your change: ``` hostname (config) # show analysis url-policy ``` 4. Save your change: ``` hostname (config) # write memory ``` ### Example The following example enables the FAUDE local intel feed. ``` hostname (config) # analysis faude-feed enable hostname (config) # show analysis url-policy    TypoSquatting:                   yes    URL phishing whitelist policy:   yes    URL phishing blacklist policy:   yes    Advanced URL Defense:            yes    Intel Feed - FAUDE:              yes ``` :