--- title: "Enabling or disabling the filter analysis engines using the CLI" slug: "enabling-or-disabling-the-filter-analysis-engines-using-the-cli" tags: ["Product Usage", "FX 10.x", "AX 10.x", "NX 10.x", "Customer", "Network Security"] updated: 2026-09-07T21:29:17Z published: 2026-09-07T21:29:17Z canonical: "docs.trellix.com/enabling-or-disabling-the-filter-analysis-engines-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling or disabling the filter analysis engines using the CLI Follow these steps to enable or disable specific filter analysis engines to perform filter analysis on PDF files. > [!NOTE] > Note > > If the filter analysis feature is disabled, then the filter analysis engines will not work even if they are enabled. **To enable the filter analysis engines:** 1. Enable the CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Enable one or both engines. To enable the Python-based engine: ``` hostname (config) # filter-analysis sa-python enable ``` To enable the JABE engine: ``` hostname (config) # filter-analysis jabe enable ``` 3. Verify that the Python or JABE engine can perform filter analysis on the appliance: ``` hostname (config) # show filter-analysis config  Filter Analysis enabled                : yes    Create job enabled                   : yes    JABE enabled                         : yes        SA-Python enabled                    : yes ``` **To disable the filter analysis engines:** 1. Enable the CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Disable the selected engine: ``` hostname (config) # no filter-analysis sa-python enable ``` or ``` hostname (config) # no filter-analysis jabe enable ``` 3. Verify that the selected engine is disabled. ``` hostname (config) # show filter-analysis config  Filter Analysis enabled                : yes    Create job enabled                   : yes    JABE enabled                         : no        SA-Python enabled                    : no ```