--- title: "Enabling or disabling the global cache local intel feed" slug: "enabling-or-disabling-the-global-cache-local-intel-feed-3" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-09-12T20:42:33Z published: 2026-09-12T20:42:33Z canonical: "docs.trellix.com/enabling-or-disabling-the-global-cache-local-intel-feed-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling or disabling the global cache local intel feed Use the commands in this topic to enable or disable Global Cache local feeds on an appliance with a one-way sharing Content Updates license. > [!NOTE] > Note > > The Global Cache local feed is enabled by default. **To enable the Global Cache local intel feed:** 1. Go to CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Enable the feed: ``` hostname (config) # analysis gc-feed enable ``` 3. Verify your change: ``` hostname (config) # show analysis file-policy ``` 4. Save your change: ``` hostname (config) # write memory ``` **To disable the Global Cache local intel feed:** 1. Go to CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Enable global cache feed: ``` hostname (config) # no analysis gc-feed enable ``` 3. Verify your change: ``` hostname (config) # show analysis file-policy ``` 4. Save your change: ``` hostname (config) # write memory ``` ### Example The following example enables the Global Cache local intel feed. ``` hostname (config) # analysis gc-feed enable hostname (config) # show analysis file-policy    Intel Feed Global Cache:              yes ```