--- title: "Enabling or disabling the local IOC feed on a specific appliance using the CLI" slug: "enabling-or-disabling-the-local-ioc-feed-on-a-specific-appliance-using-the-cli" updated: 2026-08-25T21:18:10Z published: 2026-08-25T21:18:10Z canonical: "docs.trellix.com/enabling-or-disabling-the-local-ioc-feed-on-a-specific-appliance-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling or disabling the local IOC feed on a specific appliance using the CLI The local feed is enabled or disabled for a specific managed appliance only by enabling or disabling the third-party feed for the specific appliance. ### Note A Central Management System appliance cannot distribute indicators of compromise (IOCs) to managed SmartVision Edition sensors. To enable the local feed for a specific managed Network Security appliance: 1. Log in to the Central Management System CLI. 2. Enable CLI configuration mode. ``` cm-hostname > enable cm-hostname # configure terminal ``` 3. Enable local signature generation settings. The local feed does not work if this is not enabled. By default, local signature generation is already enabled. ``` cm-hostname (config) # localsig enable ``` 4. Enable IOCs from a third-party feed for a managed Network Security appliance. ``` cm-hostname (config) # custom content enable on lms ``` where `<applianceID>` is the Network Security appliance record name. This third-party feed identifies the managed appliance for the local feed. The local feed does not work if this third-party feed is not enabled. 5. Enable IOCs from the local feed. ``` cm-hostname (config) # localsig localfeed enable ``` 6. Verify the status of IOC customizations. ``` cm-hostname (config) # show custom content enable status CMS status        CM-1 : enabled LMS status        B9-vNX2500-1 : enabled ``` 7. Verify the status of the local IOC feed. ``` CMS1 > show localsig LocalSig Generator      Enabled : YES      Running : running Rule Versions : 1 Active rules : 1337    LocalFeed : Enabled ``` 8. Save your changes. ``` cm-hostname (config) # write memory ``` To disable the local feed for a specific managed Network Security appliance: 1. Log in to the Central Management System CLI. 2. Enable CLI configuration mode. ``` cm-hostname > enable cm-hostname # configure terminal ``` 3. Disable IOCs from a third-party feed for a specific managed Network Security appliance. When you disable IOCs from a third-party feed for a managed appliance, the IOCs from the local feed for the appliance are also disabled. ``` cm-hostname (config) # no custom content enable on lms ``` where `applianceID` is the Network Security appliance record name. 4. Save your changes. ``` cm-hostname (config) # write memory ``` 5. Log in to the CLI on the managed Network Security appliance. 6. Enable CLI configuration mode. ``` nx-hostname > enable nx-hostname # configure terminal ``` 7. Verify the status of third-party IOC feeds. ``` nx-hostname (config) # show custom content enable status Custom content : disabled ``` :