--- title: "Enabling or disabling the OCSP override responder using the CLI" slug: "enabling-or-disabling-the-ocsp-override-responder-using-the-cli-1" tags: ["File Protect (FX)", "Malware Analysis (AX)", "IAM", "Email Security - Cloud", "Network Security (NX)", "Email Security — Server", "Central Management System", "Helix Enterprise", "Endpoint Security (HX)", "Product Usage", "Install and Get Started", "Helix", "Intelligent Virtual Execution "] updated: 2026-09-01T19:03:07Z published: 2026-09-01T19:03:07Z canonical: "docs.trellix.com/enabling-or-disabling-the-ocsp-override-responder-using-the-cli-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling or disabling the OCSP override responder using the CLI Use the CLI commands in this section to enable or disable the OCSP override responder so that the default OCSP responder is used when the certificate is being validated even if the certificate references an OCSP responder. ### Note The OCSP override responder setting is disabled by default. To enable the OCSP override responder: 1. Go to CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Enable the override of the OCSP responder from the certificate that is being validated and instead use the default OCSP responder. ``` hostname (config) # aaa authentication certificate ocsp override-responder ``` 3. Verify the status of the OCSP responder. ``` hostname (config) # show aaa authentication certificate ``` ``` Certificate based authentication settings: ``` ```  Web Policy                     : required ``` ```  Certificate field for username : x509-cert-subject-cn ``` ```  CA certificate bundle          : client-cert-auth ``` ```  OCSP enabled                   : no ``` ```  Default OCSP URL               : http://10.3.13.219:80 ``` ``` OCSP override responder        : yes ``` ```  ... ``` 4. Save your changes. ``` hostname (config) # write memory ``` To disable the OCSP override responder: 1. Go to CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Disable the override of the OCSP responder from the certificate that is being validated. ``` hostname (config) # no aaa authentication certificate ocsp override-responder ``` 3. Verify the status of the OCSP responder. ``` hostname (config) # show aaa authentication certificate ``` ``` Certificate based authentication settings: ``` ```  Web Policy                     : required ``` ```  Certificate field for username : x509-cert-subject-cn ``` ```  CA certificate bundle          : client-cert-auth ``` ```  OCSP enabled                   : no ``` ```  Default OCSP URL               : http://10.3.13.219:80 ``` ``` OCSP override responder        : no ``` ```  ... ``` :