--- title: "Enabling or disabling Trellix riskware detection" slug: "enabling-or-disabling-trellix-riskware-detection-1" tags: ["File Protect (FX)", "Product Usage"] updated: 2026-08-25T10:59:30Z published: 2026-09-08T23:23:29Z canonical: "docs.trellix.com/enabling-or-disabling-trellix-riskware-detection-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling or disabling Trellix riskware detection You can enable riskware detection for Trellix Riskware rules separately from the custom riskware rules that you configure on the File Protect appliance. ### Note On appliances that support riskware detection, Trellix Riskware rules are enabled to alert by default. You can enable and disable Trellix Riskware rules by using the File Protect appliance Web UI or CLI: - [Enabling or disabling Trellix Riskware detection using the Web UI](/docs/enabling-or-disabling-trellix-riskware-detection-using-the-web-ui-1) - [Enabling or disabling Trellix Riskware detection using the CLI](/docs/enabling-or-disabling-trellix-riskware-detection-using-the-cli-1) After you have configured the appliance to detect riskware rules, you can view the analysis results on the **eAlerts** > **Riskware** page in the Web UI. ### Prerequisites - Administrator or Operator access to the File Protect appliance. - An established connection to the Internet. - A connection to the DTI Cloud. :