--- title: "Enabling or disabling VM throttling using the CLI" slug: "enabling-or-disabling-vm-throttling-using-the-cli-1" updated: 2026-09-08T23:23:18Z published: 2026-09-08T23:23:18Z canonical: "docs.trellix.com/enabling-or-disabling-vm-throttling-using-the-cli-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling or disabling VM throttling using the CLI Use these steps to enable or disable VM throttling. **To disable VM throttling:** 1. Go to CLI configure mode: ``` hostname > enable hostname # configure terminal ``` 2. Disable VM throttling: ``` hostname (config) # analysis vm-throttling disable ``` 3. Verify your changes: ``` hostname (config) # show analysis config Non-malicious duplicate file timeout     : 24 Malicious duplicate file timeout         : 4 Non-malicious duplicate URL timeout      : 4 Malicious duplicate URL timeout          : 2 Analysis reset duplicate URL timeout     : 2017/08/13 01:51:34 Blacklist retroactive hunting            : Enabled Blacklist retroactive hunting time       : 0 hours VM throttling                            : Disabled Riskware detection                       : Disabled ``` 4. Save your changes. ``` hostname (config) # write memory ``` **To enable VM throttling:** 1. Go to CLI configure mode: ``` hostname > enable hostname # configure terminal ``` 2. Enable VM throttling: ``` hostname (config) # analysis vm-throttling auto ``` 3. Verify your changes: ``` hostname (config) # show analysis config Non-malicious duplicate file timeout     : 24 Malicious duplicate file timeout         : 4 Non-malicious duplicate URL timeout      : 4 Malicious duplicate URL timeout          : 2 Analysis reset duplicate URL timeout     : 2017/08/13 01:51:34 Blacklist retroactive hunting            : Enabled Blacklist retroactive hunting time       : 0 hours VM throttling                            : AUTO NX dynamic split                         : AUTO Riskware detection                       : Disabled ``` 4. Save your changes. ``` hostname (config) # write memory ``` :