--- title: "Enabling the HelixConnect Client" slug: "enabling-the-helixconnect-client" tags: ["Integration", "Helix", "Sec Ops and Analytics"] updated: 2026-09-14T13:31:34Z published: 2026-09-14T13:31:34Z canonical: "docs.trellix.com/enabling-the-helixconnect-client" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling the HelixConnect Client Perform the following steps to enable the HelixConnect Client on a Trellix appliance and ensure that the functionality it offers is enabled. 1. Allow access to the registration URL and HelixConnect tunnel. See HelixConnect Client network requirements. 2. Make sure software requirements are met (see HelixConnect Client software requirements). 3. *If the* *HelixConnect* *tunnel is established through an HTTP proxy*: Use the `helixconnect http-proxy` command arguments on the appliance to configure the HTTP proxy host, port, authentication type, and authentication credentials. For details, see [Configuring a HelixConnect HTTP proxy](/network-and-platform/docs/configuring-a-helixconnect-http-proxy-1). 4. Enable Trellix Helix mode on the appliance, if it is not already enabled. To verify that it is enabled, use the `show helix` command. To enable it, use the `helix mode on-premises` or `helix mode on-premises with-sso` command. For details, see [Enabling Helix mode](/network-and-platform/docs/enabling-trellix-helix-mode). 5. *If the appliances are connected to a* *Trellix Helix**-enabled* *Central Management System* *appliance*: Verify that the Central Management System appliance cannot stream alerts to Trellix Helix and that the connected appliances can stream alerts to Trellix Helix. Otherwise, you will be unable to manage alerts from the appliances using the Trellix Helix Web UI. For instructions, see [Sending alerts and health stats directly from appliances](/network-and-platform/docs/sending-alerts-and-health-stats-directly-from-appliances-1). > [!NOTE] > Note > > For status information, see Checking the HelixConnect configuration and Checking HelixConnect status. For troubleshooting information, see [HelixConnect troubleshooting](/network-and-platform/docs/helixconnect-troubleshooting-1).