--- title: "Enabling the static analysis feature using the CLI" slug: "enabling-the-static-analysis-feature-using-the-cli" tags: ["Product Usage", "CMS 11.x", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Network Security"] updated: 2026-08-25T13:35:02Z published: 2026-08-25T13:35:02Z canonical: "docs.trellix.com/enabling-the-static-analysis-feature-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling the static analysis feature using the CLI Static analysis is enabled by default on the Intelligent Virtual Execution - Server appliance. Static analysis uses all of the enabled static analysis components listed in [Static Analysis .](/network-and-platform/docs/static-analysis-feature) > [!NOTE] > Note > > Static analysis is enabled by default. You can disable or re-enable it using the CLI only. **Prerequisites** - Operator or Admin access **To enable static analysis:** 1. Go to CLI configuration mode. `vx-hostname > enable vx-hostname # configure terminal` 2. Enable static analysis on the appliance. `vx-hostname (config) # static-analysis enable` 3. Verify the status that static analysis is enabled on the compute node. ```plaintext vx-hostname (config) # show static-analysis configStatic Analysis enabled               : yes  AV-suite enabled                     : yes  AV-suite version                     : 6  SA on AV-suite whitelist enabled     : no  AV-check enabled                     : yes  Dropper enabled                      : yes  YARA enabled                         : yes   Embedded object extraction enabled     : no Embedded URL extraction enabled        : yes Max URLs from files to be analyzed     : 5 Static info policy                     : Disable ``` ```plaintext Yara Configuration  Yara policy                          : both  Yara customer match limit            : 5 ........ ``` 4. Save your changes. `vx-hostname (config) # write memory`