--- title: "Enabling the web services API" slug: "enabling-the-web-services-api" tags: ["Reference"] updated: 2026-09-03T18:40:43Z published: 2026-09-03T18:40:43Z canonical: "docs.trellix.com/enabling-the-web-services-api" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling the web services API To enable the Web Services API on an integrated appliance: 1. In a terminal window, log in to the command-line interface (CLI) on the appliance where you will run the Web Services API. 2. Enable the CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 3. Enable the Web Services API: ``` hostname (config) # wsapi enable ``` 4. Verify that the Web Services API is enabled. For example, if you run the `show wsapi` command on the following appliances: Trellix Malware Analysis 8400: ``` hostname (config) # show wsapi   Server Enabled                                   :         yes   Current State                                    :         running   Max Alerts                                       :         200   Max Submission Hour Threshold                    :         667   Max Submission Day Threshold                     :         16000   Max Minute API (including Submission) Threshold  :         1000   Max Day API (including Submission) Threshold     :         100000 ``` Trellix Central Management System 4400: ``` hostname (config) # show wsapi wsapi status:   Server Enabled                                   :         yes   Current State                                    :         running   Max Alerts                                       :         200   Max Minute Threshold      :         1000   Max Day Threshold        :         1000000   OS Changes            :         no ``` If the Web Services API is enabled, the `Server Enabled` status is set to **yes**. - Network Security appliance 1. Enable the CLI configuration mode: `hostname > enable hostname # configure terminal` 2. Enter the following command on the CMS: `hostname (config) # cmc execute group sysgroup.Web_MPS command "wsapi enable"` - Email Security — Server appliance 1. Enable the CLI configuration mode: `hostname > enable hostname # configure terminal` 2. Enter the following command on the Central Management System CLI: `hostname (config) # cmc execute group sysgroup.Email_MPS command "wsapi enable"` :