--- title: "Enrolling a managed sensor directly" slug: "enrolling-a-managed-sensor-directly" updated: 2026-08-24T20:40:19Z published: 2026-08-24T20:40:19Z canonical: "docs.trellix.com/enrolling-a-managed-sensor-directly" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enrolling a managed sensor directly Use the commands in this section to enroll a managed sensor with an IVX cluster managed by another Central Management appliance. ##### To enroll a managed sensor directly: 1. Log in to the sensor CLI. 2. Go to CLI configuration mode: ``` sensor-hostname > enable sensor-hostname # configure terminal ``` 3. Prevent the local Central Management appliance (the one that manages the sensor) from overriding the settings you are configuring in this procedure: ``` sensor-hostname (config) # no fenet dti enrollment service override enable ``` 4. Change the enrollment service type to DTI, and configure the enrollment service address (the IP address of the Central Management appliance that manages the cluster): ``` sensor-hostname (config) # fenet dti enrollment service type DTI address ``` where <`cluster CM address`> is the IP address of the Central Management appliance that manages the IVXcluster. 5. Set DTI as the default enrollment service type: ``` sensor-hostname (config) # fenet dti enrollment service default DTI ``` 6. Verify your changes: ``` sensor-hostname (config) # show fenet dti configuration ``` 7. Verify the enrollment service status: ``` sensor-hostname (config) # show mvx cluster enrollment status ``` 8. Save your changes: ``` sensor-hostname (config) # write memory ``` **Example** In this example, the nx-1 sensor that is managed by a Central Management appliance with an IP address of 172.1.2.3 will be enrolled with a cluster that is managed by another Central Management appliance with an IP address of 10.11.10.11. ``` nx-1 (config) # no fenet dti enrollment service override enable nx-1 (config) # fenet dti enrollment service type DTI address 10.11.10.11 nx-1 (config) # fenet dti enrollment service default DTI nx-1 (config) # show fenet dti configuration DTI CLIENT CONFIGURATIONS:    ACTIVE SETTINGS:    Mode : online    Download source    : CMS (User8@172.1.2.3 : singleport) - Managed by CMS    Upload destination : CMS (User8@172.1.2.3 : singleport) - Managed by CMS    Mil service        : CMS (User8@172.1.2.3 : singleport) - Managed by CMS    Enrollment service : DTI (User8@10.11.10.11) - Managed by Appliance ... nx-1 (config) # show mvx cluster enrollment status MVX Cluster Enrollment Status    Enrollment Client :    Status ok              : yes    Status description     : enrolled    Last checked at        : 2019/08/14 14:56:01 Enrollment Service :    Auto enabled           : yes    Service address        : DTI (10.11.10.11)    Preferred cluster      : any (less loaded)    Cloud enabled          : no    Cloud License enabled  : no    Connect on demand      : no   Broker Info :    Cluster Name           : Cluster-02    Broker Name            : vx-4    Broker Address         : 10.11.12.13    Broker ID              : 002XXXXXXXXX    Broker State           : Connected    Failure Reason         : None    Last Connection Attempt: 2019/08/12 15:01:11    Connection Last Formed : 2019/08/12 15:01:12    Connection Last Broken : ```