--- title: "event-filter tapsender config apply" slug: "event-filter-tapsender-config-apply" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:36Z published: 2026-08-04T17:23:36Z canonical: "docs.trellix.com/event-filter-tapsender-config-apply" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # event-filter tapsender config apply Applies your changes to the event filter configuration. > [!NOTE] > Note > > Helix integration is not supported on the NX x3xx appliances and the NX 10000 appliance. > [!WARNING] > Important > > Your event filter configuration changes will not take effect until you apply the pending changes. The status `pending` or `mark_deleted` appears in the `show event-filter tapsender configuration <eventType>` command output if you did not apply the changes. ### Syntax `event-filter tapsender config apply` ### Parameters None ### Example The following example applies the changes to delete a custom filter rule for the HTTP event using the index value of 0 from the event filter configuration: ``` hostname (config) # no event-filter tapsender filter-name http index 0 ``` ``` hostname (config) # event-filter tapsender config apply ``` ### User role Admin or Operator ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 8.1