--- title: "Example: configuring authentication" slug: "example-configuring-authentication-1" tags: ["File Protect (FX)", "Malware Analysis (AX)", "IAM", "Email Security - Cloud", "Network Security (NX)", "Email Security — Server", "Central Management System", "Helix Enterprise", "Endpoint Security (HX)", "Product Usage", "Install and Get Started", "Helix", "Intelligent Virtual Execution "] updated: 2026-09-01T19:03:12Z published: 2026-09-01T19:03:12Z canonical: "docs.trellix.com/example-configuring-authentication-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Example: configuring authentication This procedure describes how to use CLI commands to configure authentication for an appliance. Prerequisites - Admin access To configure the authentication: 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Authenticate first from the local user/password settings, then from RADIUS if that does not work, then from LDAP if RADIUS does not work, and finally from TACACS+ if LDAP does not work: ``` hostname (config) # aaa authentication login default local radius ldap tacacs+ ``` 3. For users who do not exist in the local user/password settings, if there is no` Local-User` attribute returned by the RADIUS, LDAP, or TACACS+ server at login time, the login will have the same capabilities as the Monitor user. Otherwise, it will have the capabilities of the username given by the attribute. ``` hostname (config) # aaa authorization map default-user monitor hostname (config) # aaa authorization map order remote-first ``` 4. Configure the IP address and secret of the RADIUS server: ``` hostname (config) # radius-server host 10.1.0.58 key myradius123 ``` 5. Configure the IP address and secret of the TACACS+ server: ``` hostname (config) # tacacs-server host 10.1.0.58 key mytac123 ``` 6. Configure the fully-qualified hostname of the LDAP server. The hostname (not the IP address) is needed for the optional TLS certificate validation to work. ``` hostname (config) # ldap host orange.purple.com ``` 7. Configure the IP address of the LDAP server, as a fallback mechanism: ``` hostname (config) # ldap host 10.1.0.58 ``` 8. Configure the base of the user tree for LDAP: ``` hostname (config) # ldap base-dn ou=users,dc=orange,dc=com ``` 9. Configure the LDAP user schema name for LDAP: ``` hostname (config) # ldap login-attribute uid ``` 10. Configure the base of the group tree for LDAP: ``` hostname (config) # ldap group-dn cn=authgroup1,ou=groups,dc=orange,dc=com ``` 11. Configure the LDAP group schema name for membership: ``` hostname (config) # ldap group-attribute member ``` 12. Save your changes: ``` hostname (config) # write memory ``` :