--- title: "Export SSL certificate data to an external flash" slug: "export-ssl-certificate-data-to-an-external-flash-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:30:20Z published: 2026-11-19T12:30:20Z canonical: "docs.trellix.com/export-ssl-certificate-data-to-an-external-flash-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Export SSL certificate data to an external flash You can export SSL certificate data to an external flash. 1. If the Sensor is up and running, type `shutdown` from the Sensor CLI. 2. Answer `Y` to the confirmation question. 3. Wait a minute, and then turn off the Sensor. 4. Insert the compact flash into the external flash receptacle on the Sensor (see the corresponding Trellix Intrusion Prevention System Sensor Product Guide for an illustration of the location of the external flash port). 5. Turn on the system. 6. Log on to the Manager. 7. Once the connection and trust to the Manager is established, type `exportSensorcerts` from the Sensor CLI. This exports all certificate data to the external flash. 8. Once done, repeat the shutdown procedure as described in **Step 1** through **Step 3**. 9. Remove the external compact flash. > [!WARNING] > Caution > > Never remove or insert the compact flash when the Sensor is turned on.