--- title: "Exporting alerts from Endpoint Security Server" slug: "exporting-alerts-from-endpoint-security-server-2" tags: ["Install and Get Started", "NDR 4.x", "Customer", "Network Security"] updated: 2026-11-17T09:22:59Z published: 2026-11-17T09:22:59Z canonical: "docs.trellix.com/exporting-alerts-from-endpoint-security-server-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Exporting alerts from Endpoint Security Server You can set up the NDR to receive alerts from other appliances by setting up the HTTP Listener. You must configure the NDR and then the other appliance(s). The NDR HTTP listener is configured using the CLI. ### Configure the NDR appliance To configure NDR appliance for the HTTP Listener: 1. Log in to the NDR as npadmin using the NDR IP address or FQDN. For example: `$ ssh npadmin@10.1.0.1` or `$ ssh npadmin@exampleFQDN` 2. Enter privileged mode: `npadmin@ia> enable` 3. Enter the npadmin password. The password can be 5 to 24 characters long. `[sudo] password for npadmin: <password>` 4. Enter configuration mode: `npadmin@ia# configure system` 5. Enter the alert aggregation menu: `alertaggregator` 6. At the alert menu, type `A` and then press `Enter` to add a new endpoint. ![endpointsecurityserverconf.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-75a05ba3-c775-e989-94c7-cd801f140b31(4).png?sv=2026-02-06&spr=https&st=2026-11-19T12%3A50%3A32Z&se=2026-11-19T13%3A50%3A32Z&sr=c&sp=r&sig=C0r7YHhABf204Ll%2BbB5q74z%2BPReSIl6g3OhxyQzxEpg%3D) 1. Type the api type HX as H. 2. Provide the api address. 3. Press `Enter` in the Port Number field to retain default value. 4. Provide the username as `admin`. 5. Type the endpoint security server password and then press `Enter`. 7. From the alert aggregator menu, select `endpoint security server` by its index. 8. On the Edit / Delete Endpoint menu, type `T` to toggle alert polling for the device and turn it ON. 9. Type `X` and press `Enter` to save the configuration. 10. Type `X` and press `Enter` to save and exit the endpoint configuration menu.