--- title: "extract vmimage" slug: "extract-vmimage" updated: 2026-09-08T19:56:25Z published: 2026-09-08T19:56:25Z canonical: "docs.trellix.com/extract-vmimage" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # extract vmimage This command allows the user to copy OS Image present in Intelligent Sandbox to atdadmin folder. This image can further be download from atdadmin and uploaded to SR share by the customers. The command is supported from ATD version 4.12.4 and above. ##### **Syntax**: **`extract vmimage <Image Name>`** Example: extract vmimage winxpSp3 To get , run **show vmImage** command. ### Note The images that are larger in size takes approximately 20–30 minutes to copy (depending on system load). Until the image copy completes, the CLI prompt is not available. It is recommended to run the command when no activity is being done. Also, if copying the image takes longer time, then nothing should be done that time (example, reboot or power down). :