--- title: "ExtraHop configuration" slug: "extrahop-configuration-1" tags: ["Reference", "Helix Enterprise", "Sec Ops and Analytics"] updated: 2026-09-05T14:07:16Z published: 2026-09-05T14:07:16Z canonical: "docs.trellix.com/extrahop-configuration-1" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # ExtraHop configuration The ExtraHop platform has highly extensible syslog capabilities. Any metrics, whether custom or built in, can be pushed to the Helix Enterprise environment using the AI Trigger API. This section covers how to use the pre-built ExtraHop Helix Enterprise Bundle, which includes DNS, HTTP, DB, and network level metrics. For information on extending the information sent to Helix Enterprise, refer to this document found on the ExtraHop forum at: [https://forum.extrahop.com/static/ExtraHopTriggersAPI.pdf.](https://forum.extrahop.com/static/ExtraHopTriggersAPI.pdf) Installing and configuring the ExtraHop Helix Enterprise bundle 1. To download the ExtraHop Helix Enterprise Bundle to your workstation, go to: [http://tme-downloads.extrahop.com/Deployment_Guides/ExtraHop_Helix_Deployment_ Guide/ExtraHopHelixBundle.json](http://tme-downloads.extrahop.com/Deployment_Guides/ExtraHop_TAP_Deployment_%20%20Guide/ExtraHopTAPBundle.json) 2. In the ExtraHop Web UI, click **Settings** in the left navigation. 3. Click **Bundles**, and then click **Upload**. 4. Select the `ExtraHopHelixBundle.json` file, and then click **Upload**. 5. Select the **Apply 3 included assignments** checkbox, and then click **Apply** to load the bundle. The **Bundle Import Status** dialog appears. 6. Click **OK** twice to save and close the window. Triggers are disabled by default. To enable them: 1. Click **Settings** in the upper-left navigation path of the **System Settings** dialog to return to **System Settings**. 2. Click **Triggers**. 3. Select the trigger (Helix Syslog [DB], Helix Syslog [HTTP], and Helix Syslog [TCP,DNS]), and then click **Enable**. ExtraHop data is now flowing to your Helix Enterprise environment. Verify this by searching in Helix Enterprise for the `eh_event` tag. Configuring the alert syslog destination > [!NOTE] > Note > > In an ECM-powered deployment, perform these steps on each node, not on the ECM. 1. In the ExtraHop Web UI, click **Settings** in the left navigation, and then click **Administration**. 2. Go to the **Network Settings** section and click **Notifications**. 3. Click **Syslog**. 4. Make the following selections on the **Syslog Notification Settings** page: 1. Enter the host name or IP of the Helix Enterprise Comm Broker in the **Destination** field. 2. Select **UDP** on the **Protocol** drop-down list. 3. Enter port 514 in the **Port** field. 5. Click **Save**.