--- title: "Fast Ethernet (FE) 10/100/1000 ports" slug: "fast-ethernet-fe-10-100-1000-ports" tags: ["Install and Get Started", "IPS 10.1.10"] updated: 2026-09-23T09:38:30Z published: 2026-09-23T09:38:30Z canonical: "docs.trellix.com/fast-ethernet-fe-10-100-1000-ports" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Fast Ethernet (FE) 10/100/1000 ports 10/100/1000 monitoring ports use Cat 5/Cat 5e cables. The Sensor's normal mode of operation, using pins 1&2 and 3&6, is to fail-open, which means the data will continue to pass through the Sensor allowing continued data flow. In this mode, pins 4&5 are terminated to ground via 75 ohm and a capacitor. | Pin # | Signal | Direction on Sensor | | --- | --- | --- | | 1 | TxD+ FO | (See text above) | | 2 | TxD- FO | | | 3 | RxD+ | Input | | 4 | TxD+ FC | Reserved for use in the fail-closed dongle. | | 5 | TxD- FC | | | 6 | RxD- | Input | | 7 | These pins are terminated to ground through a 75 ohm resistor & capacitor. | | 8 |