--- title: "Faults" slug: "faults-7" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:31:15Z published: 2026-11-19T12:31:15Z canonical: "docs.trellix.com/faults-7" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Faults The **Faults** tab in **Manager** → **Troubleshooting** → **Logs** page displays messages that are generated to detail the system faults experienced by each of your Trellix IPS components installed. > [!NOTE] > Note > > When management faults are raised and cleared too frequently on the Manager, the Manager may not have sufficient time to forward those faults to the Central Manager. As a result, there can be a fault count mismatch between the Manager and Central Manager for management faults. To view the faults, follow the steps below: **Steps:** 1. Go to **Manager** → **Troubleshooting** → **Logs**. The **Logs** page opens. 2. Select **Faults** tab to view the system faults. The data displayed in the table is based on the time frame of the core attribute in the faults table. By default, the logs for last 7 days are displayed. The data can be filtered for the time period of your preference using the**Custom Time Period** option. The following table lists the fields on the **Faults** tab: | Options | Definition | | --- | --- | | **Time** | Displays date and time of fault occurrence | | **Fault** | Displays severity and summary of the activity - **Severity**: Displays severity level of the activity Different severity levels are as follows: - **INFORMATIONAL** - **WARNING** - **ERROR** - **CRITICAL** - **Summary**: Displays brief summary of the activity | | **Details** | Displays brief report on nature of the activity | | **Duration** | Displays the time period of fault existence | | **Device** | Displays the details of the device that has generated the fault The **Device** column contains two sub-columns: - **Generated By** - Specifies the device that generated the fault. The device can be the Central Manager or a Manager - **Forwarded By** - Provides more information about the device that generated a fault. For example, if a Manager generates a fault, this column specifies if the device is a primary Manager, secondary Manager, or a Sensor attached to the Manger. | 3. You can save a copy of faults by clicking **Save as CSV**. > [!NOTE] > Note > > The **Save as CSV** option saves a copy of system faults based on the filters applied. To save a copy of all system faults, clear all filters before saving it as **Save as CSV**.