--- title: "fenotify integ helix enable" slug: "fenotify-integ-helix-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:45Z published: 2026-08-04T17:22:45Z canonical: "docs.trellix.com/fenotify-integ-helix-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # fenotify integ helix enable Enables Helix Enterprise integration. ### Syntax `[no] fenotify integ helix enable` ### Parameters `no` Use the no form of this command to disable Helix Enterprise integration. ### Example The following example enables Helix integration. ``` ex-04 (config) # fenotify integ helix enable ``` ### User role Admin or Operator ### Command mode Config ### Supported appliances > [!NOTE] > Note > > The command was removed from the Email Security — Server, File Protect, Malware Analysis, and Network Security appliances in Release 9.0.2. The command was removed from the appliances in Release 5.1.0. This command was replaced by the datastreaming Helix Enterprise commands. This command is supported on the following appliances running the specified releases or later, except as noted above: - **Central Management System:** Release 8.3.0 - **Email Security — Server:** Release 8.3.0 - **Endpoint Security (HX):** Release 4.0.0 - **File Protect:** Release 8.3.0 - **Malware Analysis:** Release 8.3.0 - **Network Security:** Release 8.3.0