--- title: "fenotify integ helix hostname <ip address> <fqdn>" slug: "fenotify-integ-helix-hostname-ip-address-fqdn" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:45Z published: 2026-08-04T17:22:45Z canonical: "docs.trellix.com/fenotify-integ-helix-hostname-ip-address-fqdn" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # fenotify integ helix hostname <ip address> <fqdn> Configures the Helix Enterprise IP address or fully qualified domain name address. ### Syntax `[no] fenotify integ helix hostname <ip address> <fqdn>` ### Parameters `no` Use the no form of this command to remove the Helix Enterprise hostname address. `ip address` Helix EnterpriseP address. `fqdn` The fully qualified domain name for Helix Enterprise. ### Example The following example configures the IP address for Helix Enterprise. ``` ex-04 (config) # fenotify integ helix 172.2.3.4 ``` ### User role Admin or Operator ### Command mode Config ### Supported appliances > [!NOTE] > Note > > The command was removed from the Email Security — Server, File Protect, Malware Analysis, and Network Security appliances in Release 9.0.2. The command was removed from the appliances in Release 5.1.0. This command was replaced by the datastreaming Helix Enterprise commands. This command is supported on the following appliances running the specified releases or later, except as noted above: - **Central Management System:** Release 8.3.0 - **Email Security — Server:** Release 8.3.0 - **Endpoint Security (HX):** Release 4.0.0 - **File Protect:** Release 8.3.0 - **Malware Analysis:** Release 8.3.0 - **Network Security:** Release 8.3.0