--- title: "fenotify integ helix include-oschanges enable" slug: "fenotify-integ-helix-include-oschanges-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:45Z published: 2026-08-04T17:22:45Z canonical: "docs.trellix.com/fenotify-integ-helix-include-oschanges-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # fenotify integ helix include-oschanges enable Specifies whether Helix alerts should include OS changes. > [!NOTE] > Note > > This setting is enabled by default if Helix mode is enabled on the appliance. ### Syntax `[no] fenotify integ helix include-oschanges enable` ### Parameters `no` Use the no form of this command to prevent OS changes from being included in Helix alerts. ### Example The following example enables OS changes to be included in Helix alerts. ``` cm-05 (config) # fenotify integ helix include-oschanges enable cm-05 (config) # show fenotify integ helix Helix Integration Notification Settings: ============================================= ... include os-changes        :   true ... ``` ### User role Admin or Operator ### Command mode Config ### Supported appliances > [!NOTE] > Note > > The command was removed from the Email Security — Server, File Protect, Malware Analysis, and Network Security appliances in Release 9.0.2. The command was removed from the appliances in Release 5.1.0. This command was replaced by the datastreaming Helix commands. This command is supported on the following appliances running the specified releases or later, except as noted above: - **Central Management System:** Release 8.3.0 - **Email Security — Server:** Release 8.3.0 - **Endpoint Security (HX):** Release 4.0.0 - **File Protect:** Release 8.3.0 - **Malware Analysis:** Release 8.3.0 - **Network Security:** Release 8.3.0