--- title: "Filter tab" slug: "filter-tab-2" tags: ["Install and Get Started", "NDR 4.x", "Customer", "Network Security"] updated: 2026-11-17T09:23:23Z published: 2026-11-17T09:23:23Z canonical: "docs.trellix.com/filter-tab-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Filter tab The NDR Search has a filter tab that allows you to filter query results. For example, you may have a set of results that correspond to all sessions between two hosts, for example, 192.168.1.11 and 192.168.1.14. You can filter this result set for sessions that are on destination transport port 23. When you add and apply a filter to an active search query, NDR updates the associated dashboard with an "active" filter status at the top of the dashboard. **To use the Filter tab to add a filter to your search query:** 1. Click ![Main_menu.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-0124baa3-4d5b-b290-686f-053b2ba4658f(4).png?sv=2026-02-06&spr=https&st=2026-11-19T12%3A42%3A32Z&se=2026-11-19T13%3A42%3A32Z&sr=c&sp=r&sig=KRzofKjpHbw9QLD7S8W1l%2BbBFWIu%2Fjf7vy6doOlvsdg%3D) and from **INVESTIGATION**, select **Search**. 2. click the **Filters** tab on the left of the dashboard. 3. Click the arrow in the **Operator** field and select the operator you want to apply to your search filter: Must, Must Not, or Either. 4. Click the arrow in the **Term** field and select the field filter you want to apply to your search. 5. Enter the field term or value in the **Value** field. 6. Check the **Enable** checkbox and click **Apply**. > [!WARNING] > Important > > When using the **Filter** tab, you must click the **Apply** button at the bottom left of the Filter tab each time you add or modify a filter. This applies the new or modified filter to your NDR search query.