--- title: "fmps s3-onprem config" slug: "fmps-s3-onprem-config" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:50Z published: 2026-08-04T17:22:50Z canonical: "docs.trellix.com/fmps-s3-onprem-config" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # fmps s3-onprem config Configures the user credentials to connect to an S3 on-prem storage. The S3 on-prem integration on the File Protect appliance uses the NetApp StorageGRID service to store and secure files. The File Protect appliance scans the files in the S3 on-prem storage for malware and quarantines the files marked as malicious. You can configure the location to quarantine these files. > [!NOTE] > Note > > The Access key and Secret access key are set in the S3 on-prem storage host. The storage administrator has the permission to set these keys in the host platform. ### Syntax `fmps s3-onprem config access-id <accessIDKey>` `fmps s3-onprem config secret <secretKey>` `fmps s3-onprem config hostname <hostName>` `fmps s3-onprem config port <port>` ### Parameters `<accessIDKey>` Access ID key retrieved from the S3 on-prem storage host. `<secretKey>` Secret key retrieved from the S3 on-prem storage host. `<hostName>` The host IP address where the S3 on-prem storage is maintained. `<port>` The port number on which the S3 APIs are enabled on the S3 on-prem storage. ### Example The following example configures the access ID key retrieved from the S3 on-prem storage host. ``` hostname (config) # fmps s3-onprem config access-id 5RTYED3R4DSDFTR4F hostname (config) # ``` ### User role Administrator ### Command mode Configuration ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **File Protect:** Release 10.0.2