--- title: "fmps scan configure scan-name" slug: "fmps-scan-configure-scan-name" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:50Z published: 2026-08-04T17:22:50Z canonical: "docs.trellix.com/fmps-scan-configure-scan-name" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # fmps scan configure scan-name To provide a name for a configured scan, use the **fmps scan configure scan-name** command in configuration mode. > [!NOTE] > Note > > You can use this command only on scans that are in the "configured" state. You cannot configure active, paused, aborted, completed, or scheduled scans. The system automatically assigns a unique scan number to each scan. You can configure an optional name for a scan. The name does not have to be unique. For more information, see the *File Protect User Guide.* ### Syntax `[no] fmps scan configure <scanID> scan-name <scanName>` ### Parameters `[no]` Removes the configured scan name. `<scanID>` The numeric identifier for the scan, which is automatically assigned by the system. `scan-name<scanName>` The scan name. Spaces are not allowed. ### Example The following example names scan 95 "WeeklyPayroll." ``` hostname (config) # fmps scan configure 95 scan-name WeeklyPayroll ``` ### User role Operator or Admin role ### Supported appliances Command introduced in Release 7.5.0 for File Protect appliances.