--- title: "fmps scan configure <scanID> dynamic-analysis <fileExtensions>" slug: "fmps-scan-configure-scanid-dynamic-analysis-fileextensions" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:50Z published: 2026-08-04T17:22:50Z canonical: "docs.trellix.com/fmps-scan-configure-scanid-dynamic-analysis-fileextensions" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # fmps scan configure <scanID> dynamic-analysis <fileExtensions> Configures file types for dynamic analysis in a specified scan. > [!NOTE] > Note > > You can use this command only on scans that are in the "configured" state. The CLI cannot be used for running, paused, aborted and completed scans. ### Syntax `[no] fmps scan configure <scanID> dynamic-analysis <fileExtensions>` ### Parameters `no` Disables specified file types for dynamic analysis. `scanID` The numeric identifier for the scan. `fileExtensions` Specifies the file types to select for Dynamic Analysis. Separate multiple file types with spaces. ### Example The following example specifies that scan 71 configures file types, ‘.bat’ and ‘.htm’ for dynamic analysis: ``` hostname (config) # fmps scan configure 71 dynamic-analysis bat htm ``` ### User role Operator or admin ### Supported appliances - **File Protect:** Release 10.0