--- title: "fmps scan configure start-time" slug: "fmps-scan-configure-start-time" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:54Z published: 2026-08-04T17:22:54Z canonical: "docs.trellix.com/fmps-scan-configure-start-time" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # fmps scan configure start-time To specify how far back in time a configured scan should check for new or modified files, use the **fmps scan configure start-time** command in configuration mode. > [!NOTE] > Note > > You can use this command only on scans that are in the "configured" state. You cannot configure active, paused, aborted, completed, or scheduled scans. This command allows you to limit the scope of a scan by defining that it scan only files that were added or changed *after* a specified date and time or *since* a specified time in the past. For more information, see the *File Protect User Guide.* ### Syntax `[no]fmps scan configure<scanID>start-time after<YYY>/<MM>/<DD><hh>:<mm>:<ss>` `[no] fmps scan configure<scanID>start-time since<number>days<number>hours<number>minutes<number>seconds` ### Parameters `[no]` Removes the defined start time. `<scanID>` The numeric identifier for the scan. `after<YYY>/MM>/<DD><hh>:<mm>:<ss>` The date and time from which scanning should start, where `<YYYY>` is the year, `<MM>` is the month (01-12), `<DD>` is the day (01-31), `<hh>` is the hour (01-23), `<mm>` is the minute (01-59), and `<ss>` is the second (01-59) `since<number>days<number>hours<number>minutes<number>seconds` The period of time from which scanning should start. Each parameter must be defined; if you want to skip one, enter `0` as the number. ### Examples The following example specifies that scan 98 should check for files that were added or changed after September 15, 2014 at 4:00 a.m. ``` hostname (config) # fmps scan configure 98 start-time after 2014/09/15 04:00:00 ``` The following example specifies that scan 67 should check for files that were added or changed in the last 12 hours. ``` hostname (config) # fmps scan configure 67 start-time since 0 days 12 hours 0 minutes 0 seconds ``` ### User role Operator or Admin role ### Supported appliances Command introduced in Release 7.5.0 for File Protect appliances.