--- title: "fmps scan create" slug: "fmps-scan-create" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-09-29T13:58:56Z published: 2026-09-29T13:58:56Z canonical: "docs.trellix.com/fmps-scan-create" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # fmps scan create Creates a new scan. When you create a scan, the type of scan is not defined. The scan is defined and it can be configured with attributes, but it is not started. For more information, see the following commands: - [fmps share configure share-name ca-file](/network-and-platform/docs/fmps-share-configure-share-name-ca-file) - [fmps share configure share-name protocol](/network-and-platform/docs/fmps-share-configure-share-name-protocol) - [fmps share configure share-name server](/network-and-platform/docs/fmps-share-configure-share-name-server) - [fmps share configure share-name auth](/network-and-platform/docs/fmps-share-configure-share-name-auth) - [fmps scan start](/network-and-platform/docs/fmps-scan-start) The `from scan` version of this command creates a scan using an existing scan as a template. The new scan has the same parameters as the existing scan but can be modified, and will run on the same share as the existing scan. The `from share` version of this command creates a base scan with no defined criteria that will run on the specified share. > [!WARNING] > Important > > New scans will not be shown on the **Currently Configured Scans** page in the Web UI until you start or schedule them. See [fmps scan start](/network-and-platform/docs/fmps-scan-start) and [fmps scan schedule](/network-and-platform/docs/fmps-scan-schedule) . For more information, see the File Protect User Guide. ### Syntax `fmps scan create from scan <scanID>` `fmps scan create from share <shareName>` ### Parameters `scan <scanID>` Creates a new scan based on an existing scan with the specified ID. `share <shareName>` Creates a base scan with no defined criteria on the specified share. ### Examples The following example creates a new scan based on scan `85`. The new scan will run on the same share as scan `85`. ```plaintext hostname (config) # fmps scan create from scan 85 Scan 143 configured ``` The following example creates a new scan on the Acme_IT share: ```plaintext hostname (config) # scan create from share Acme_IT Scan 144 configured ``` ### User role Operator or Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **File Protect****:** Release 7.5.0