--- title: "fmps scan start" slug: "fmps-scan-start" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:54Z published: 2026-08-04T17:22:54Z canonical: "docs.trellix.com/fmps-scan-start" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # fmps scan start Starts a configured scan and specifies the scan type. > [!NOTE] > Note > > When you create a scan, the type of scan is not defined. The scan is defined and it can be configure with attributes, but it is not started. For more information, see [fmps scan create](/network-and-platform/docs/fmps-scan-create) . ### Syntax `fmps scan start <scanID> {continuous | listen | now | prescan}` ### Parameters `<scanID>` The numeric identifier for the configured scan. `continuous` Defines and starts a continuous scan. `listen` Defines and starts a listen scan. `now` Defines and starts an on-demand scan. `prescan` Defines and starts a pre-scan. ### Examples The following example starts scan 203 as a continuous scan. ``` hostname (config) # fmps scan start 203 continuous ``` The following example starts scan 85 as a listen scan. ``` hostname (config) # fmps scan start 85 listen ``` ### User role Operator or Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **File Protect:** Release 7.5.0