--- title: "Generate Big Movers reports" slug: "generate-big-movers-reports-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:29:17Z published: 2026-11-19T12:29:17Z canonical: "docs.trellix.com/generate-big-movers-reports-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Generate Big Movers reports The Big Movers report is a comparison report of attacks occurred in recent time interval with those occurred in a pervious time interval. This is more clear because Recent time interval, and Previous time interval settings can be set in the UI. You can define the time intervals of the two time periods and get a detailed report of attacks with percentage and direction. **Steps:** 1. Select **Analysis** → **Event Reporting** → **Traditional Reports**. The **IPS Events** page is displayed. 2. Click the **Big Movers** link. 3. Select the required fields you need to configure: - **Admin Domain** — Select the admin domain in which to view alerts. > [!NOTE] > Note > > The admin domain selected in the left pane has no impact on the reports generated. The **Admin Domain** drop-down list is explicitly to filter the reports that are generated. - **Sensor** - **All Devices** is checked by default. This displays information of all devices present at the selected Admin domain. To select your preference of devices, de-select **All Sensors** and select the devices from the list box. - **Include Child Admin Domains** — Displays device information for child domains. - **Attack Severity** — Select one or more from the **Informational**, **Low**, **Medium**, or **High** severities, which relate to attack impact. - **Recent Time Interval** and **Previous Time Interval** — Enter the time period. - **Ranking Basis** — Select one of the following: - Percentage change in attack count - Change in attack account value - **Direction** — Select one of the following directions of how alerts occurred should be displayed: - Upward Movers only - Upward and Downward Movers - Downward Movers only - **Maximum Movers** — Enter the value of maximum occurred alerts to be displayed. - Select the **Report Format**. 4. Click **Run Report**. The report is displayed with attack details if any.