--- title: "Generate Faults reports" slug: "generate-faults-reports-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:27:57Z published: 2026-11-19T12:27:57Z canonical: "docs.trellix.com/generate-faults-reports-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Generate Faults reports The **Faults Report** enables you to see the details of Sensor and Manager faults that have occurred in the past. Reports can be generated based on the fault name, its creation time, its fault severity, or by the Sensor ID. To generate the report, do the following: **Steps:** 1. Click the **Manager** tab from the Manager Home page. 2. Select **** → **Reporting** → **Configuration Reports** → **Faults**. 3. Specify the following to narrow down the scope of your report: - **Fault Source** — Select **Sensor** and/or **Manager** to find faults on your Sensor and/or Manager, respectively. - **Admin Domain** — Select an admin domain on which to run the report. This is enabled only if the selected **Fault Source** is **Sensor**. > [!NOTE] > Note > > The admin domain selected in the left pane has no impact on the reports generated. The **Admin Domain** drop-down list is explicitly to filter the reports that are generated. - **Include Child Admin Domains** — If you have selected **Include Child Admin Domains**, Sensors in the child admin domains of the selected admin domain are also displayed. This is enabled only if the selected **Fault Source** as **Sensor**. - **Sensor** — Select one or all devices on which to run the report. - **Fault Severity** — Select one or more of the following: - **Informational** - **Warning** - **Error** - **Critical** - **Fault State** — Select one of the following from the drop-down menu: - **All Faults** - **Active Faults** - **Deleted Faults** - **Acknowledged Faults** - **Select the Duration** — Select from one of the following duration from the drop-down list: - **Last 5 minutes** - **Last 1 hour** - **Last 6 hours** - **Last 12 hours** - **Last 24 hours** - **Last 48 hours** - **Last 7 days** - **Last 14 days** - **Custom time period** —Enables you to select and view specific faults between a **Start Time** and **End Time** (you can specify both the date and time and click **Apply**) > [!NOTE] > Note > > Faults with creation date previous to the **Start Time** may get displayed too, implying that the particular fault had occurred before the begin data and re-occurred again between the **Start Time** and **End Time**. - Select the **Report Format** - **Organized by** — Specify how you want the information to be organized in the report. Choices are **Severity**, **Fault Name**, **Sensor**, or **Create Time**. For example, if you choose **Severity**, then the information is organized by fault name in the reverse alphabetical order. Create Time is the fault generation time. 4. Click **Run** to generate the report. > [!NOTE] > Note > > Only 5000 faults can be processed for a report. If more than 5000 faults are involved, a note is displayed recommending you to narrow down the scope of your report. The field descriptions under the **Fault Log details** section of this report are as follows: | Field Name | Description | | --- | --- | | **Time** | The time at which the fault was generated. | | **Duration** | The length of time the fault lasted. For example, in the case of a performance fault, this is the number of minutes between when the performance first went over its threshold and when it subsequently fell below its reset threshold. | | **Source** | The source of the fault. | | **Criticality** | Specifies the severity level of the fault. | | **Name** | Specifies the name of the fault. | | **Description** | A detailed description of the fault. | | **Type** | The type of fault. | | **Acknowledged** | Indicates whether the fault is acknowledged or not. | | **Deleted** | Indicates whether the fault is deleted or not. | | **Last Updated** | The time at which the fault was last modified. This time stamp gets updated when the fault is acknowledged. |