Generate IPS Sensor reports

The Physical Sensor report provides information on the current software/signature versions, the status of a Sensor's ports, as well as configured settings such as non-standard ports.

To generate a Physical Sensor report, do the following:

1. Click the Manager tab from the Manager Home page.
2. Select <Admin Domain Name> → Reporting → Configuration Reports → IPS Sensor.
3. Select one or more Sensors.

   Tip

   Sensor Reports can be very long when multiple Sensors are selected. Trellix recommends selecting a single Sensor for ease of readability.

4. Select one or more of the following based on what information you want to see in the report:
   • Device Information— Sensor name, Sensor IP address, Sensor up time, and so on.
   • Port Configuration— Operation mode, operational status, port speed, and so on.
   • Interface Configuration— Traffic type (CIDR, VLAN, dedicated), applied policies, sub-interfaces created, and so on.
   • TCP/IP Settings— Settings configured within the <Device Name> → Advanced Settings → TCP/IP action.
   • Non-standard Ports— Configured non-standard ports
   • Alerting Options— Alert Suppression Response Action, Packet Log Response Action, Passive Device Profiling, and IPS Event Notification.
   • Trellix Intelligent Sandbox Integration— Settings configured within <Device Name> → Settings → Trellix Intelligent Sandbox Integration.
   • TIE Integration—
   • L2 Switch & SSL Configuration— Layer 2 Pass-Through Monitoring, ARP Spoofing, Layer 2 Pass-Through Status, and SSL Configuration Settings
   • TACACS+ Authentication Settings— Status, Server IP Address(s) and Encryption status.
   • NMS Configuration— IP Address, Creation level and Users.
   • Exception Details—
   • NTBA Configuration— NTBA Appliance name, Destination IP address and Destination Port Number.
   • CLI Auditing—
   • Response Actions— Settings configured within the <Device Name> → Advanced Settings → Response Action.
   • Firewall Configuration—
   • Quarantine Information— Remediation Portal IP Address, Quarantine Time Interval.
   • Layer 7 Data Collection—
   • NTP Server Details—
   • Performance Monitoring—
5. Select the Output Format.
6. Click Submit.