--- title: "Generate IPS Sensor reports" slug: "generate-ips-sensor-reports" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:40:03Z published: 2026-10-05T15:40:03Z canonical: "docs.trellix.com/generate-ips-sensor-reports" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Generate IPS Sensor reports The Physical Sensor report provides information on the current software/signature versions, the status of a Sensor's ports, as well as configured settings such as non-standard ports. To generate a Physical Sensor report, do the following: ## Task 1. Click the **Manager** tab from the Manager Home page. 2. Select **** → **Reporting** → **Configuration Reports** → **IPS Sensor**. 3. Select one or more **Sensors**. > [!NOTE] > Tip > > Sensor Reports can be very long when multiple Sensors are selected. Trellix recommends selecting a single Sensor for ease of readability. 4. Select one or more of the following based on what information you want to see in the report: - **Device Information**— Sensor name, Sensor IP address, Sensor up time, and so on. - **Port Configuration**— Operation mode, operational status, port speed, and so on. - **Interface Configuration**— Traffic type (CIDR, VLAN, dedicated), applied policies, sub-interfaces created, and so on. - **TCP/IP Settings**— Settings configured within the **** → **Advanced Settings** → **TCP/IP** action. - **Non-standard Ports**— Configured non-standard ports - **Alerting Options**— Alert Suppression Response Action, Packet Log Response Action, Passive Device Profiling, and IPS Event Notification. - **Trellix Intelligent Sandbox Integration**— Settings configured within **** → **Settings** → **Trellix Intelligent Sandbox Integration**. - **TIE Integration**— - **L2 Switch & SSL Configuration**— Layer 2 Pass-Through Monitoring, ARP Spoofing, Layer 2 Pass-Through Status, and SSL Configuration Settings - **TACACS+ Authentication Settings**— Status, Server IP Address(s) and Encryption status. - **NMS Configuration**— IP Address, Creation level and Users. - **Exception Details**— - **NTBA Configuration**— NTBA Appliance name, Destination IP address and Destination Port Number. - **CLI Auditing**— - **Response Actions**— Settings configured within the **** → **Advanced Settings** → **Response Action**. - **Firewall Configuration**— - **Quarantine Information**— Remediation Portal IP Address, Quarantine Time Interval. - **Layer 7 Data Collection**— - **NTP Server Details**— - **Performance Monitoring**— 5. Select the **Output Format**. 6. Click **Submit**.