--- title: "getsastats" slug: "getsastats-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:27:25Z published: 2026-11-19T12:27:25Z canonical: "docs.trellix.com/getsastats-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # getsastats The `getsastats` command displays the statistics of the SNMP subagent. **Syntax:** `getsastats` **Sample Output:** `IntruDbg#> getsastats` `swImageVersion = 10.1.5.190` `hwVersion = 1.20` `serial number = S025250127.` `signature set version = 10.9.35.3.` `system type = IPS-NS9200.` `Recvd datapaths and dos Init Done message from system controller.` `Sent SNMP ready message to control channel.` `Sigfile flag = 0` `Number of datapaths = 8.` `Connection to datapath 0 is ok.` `Connection to datapath 1 is ok.` `Connection to datapath 2 is ok.` `Connection to datapath 3 is ok.` `Connection to datapath 4 is ok.` `Connection to datapath 5 is ok.` `Connection to datapath 6 is ok.` `Connection to datapath 7 is ok.` `DOS connection status is ok.` `IPv6 Status DISABLED` `GTI Proxy Host 0.0.0.0` `GTI Proxy Port 0` `GTI Proxy Username ""` `UsrIdAclfileDwnldCnt = 0` `UsrIdAclIncrUpdtCnt = 0` `osfpPersistMsgTxCount = 108` **Applicable to:** NS-series Sensors