The getsastats command displays the statistics of the SNMP subagent.
Syntax:
getsastats
Sample Output:
IntruDbg#> getsastats
swImageVersion = 10.1.5.190
hwVersion = 1.20
serial number = S025250127.
signature set version = 10.9.35.3.
system type = IPS-NS9200.
Recvd datapaths and dos Init Done message from system controller.
Sent SNMP ready message to control channel.
Sigfile flag = 0
Number of datapaths = 8.
Connection to datapath 0 is ok.
Connection to datapath 1 is ok.
Connection to datapath 2 is ok.
Connection to datapath 3 is ok.
Connection to datapath 4 is ok.
Connection to datapath 5 is ok.
Connection to datapath 6 is ok.
Connection to datapath 7 is ok.
DOS connection status is ok.
IPv6 Status DISABLED
GTI Proxy Host 0.0.0.0
GTI Proxy Port 0
GTI Proxy Username ""
UsrIdAclfileDwnldCnt = 0
UsrIdAclIncrUpdtCnt = 0
osfpPersistMsgTxCount = 108
Applicable to:
NS-series Sensors