--- title: "Getting started with NS3600 Sensor" slug: "getting-started-with-ns3600-sensor-1" updated: 2026-10-02T09:46:11Z published: 2026-10-02T09:46:11Z canonical: "docs.trellix.com/getting-started-with-ns3600-sensor-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Getting started with NS3600 Sensor > [!NOTE] > Note > > This section provides step-by-step instructions on how to get started with the NS3600 Sensor. This includes a checklist of the topics that you should review before setting up the Sensor, its physical installation steps, cabling requirements, how to install interface and transceiver modules, steps to set it up with Trellix IPS Manager, and license requirements. Trellix recommends that you go through the entire hardware guide for a better understanding of how to configure and manage the Sensor. 1. Before you start setting up the Trellix IPS NS3600 Sensor, do the following: 1. Learn about the [components of NS3600 Sensor](/network-and-platform/docs/components-of-ns3600-sensor) and [LED specifications](/network-and-platform/docs/sensor-leds-2) 2. Review the [safety considerations](/network-and-platform/docs/safety-considerations-2) 3. Review the [product compliance information](/network-and-platform/docs/appendix-2-ns3600-product-compliance-information) 4. Check the [Sensor technical specifications](/network-and-platform/docs/appendix-1-ns3600-sensor-technical-specifications) 5. [Verify the hardware and software requirements](/network-and-platform/docs/verify-the-hardware-and-software-requirements-2) 6. [Verify the contents in the box](/network-and-platform/docs/verify-the-contents-of-the-box) 2. Perform the physical installation of the Sensor: 1. [Unpack the Sensor](/network-and-platform/docs/unpack-the-sensor-3) 2. Learn [how to position the Sensor](/network-and-platform/docs/how-to-position-the-sensor-2) 3. [Install the Sensor](/network-and-platform/docs/install-the-sensor) 3. Attach the required cables to the Sensor: 1. [Connect the cable to the Console port](/network-and-platform/docs/connect-the-supplied-console-cable-to-the-console-port) 2. [Connect the cable to the Response port](/network-and-platform/docs/connect-the-cable-to-the-response-port-2) 3. [Connect the cable to the Management port](/network-and-platform/docs/connect-the-cable-to-the-management-port-2) 4. [Connect cables to the Monitoring ports](/network-and-platform/docs/about-connecting-cables-to-the-monitoring-ports-5) 4. Install an Interface module: 1. Learn about the [network interface modules supported in NS3600 Sensor](/network-and-platform/docs/ns-series-interface-modules-supported-in-ns3600-sensor) > [!WARNING] > Caution > > Apart from the interface modules discussed in the topic above (that is, 4-port 10/1 GigE MM 50/62.5 μm with built-in fail open and 4-port RJ-45 1 Gbps/100 Mbps/10 Mbps with built-in fail open), no other interface modules are compatible with NS3600 Sensor. 2. Install an interface module during a fresh installation of the Sensor. 5. Install a transceiver module: 1. Learn about [the transceiver modules supported in NS3600 Sensor](/network-and-platform/docs/setting-up-ns3600-sensor-with-a-transceiver-module) 2. [Install a transceiver module in the Sensor](/network-and-platform/docs/install-a-transceiver-module-2) > [!NOTE] > Note > > Transceiver modules are supported only in the ports 5 and 6. 6. [Install the Trellix IPS Manager Software](/network-and-platform/docs/install-the-manager-software-2) and then set up the Sensor with the Manager: 1. [Add the Sensor to the Manager](/network-and-platform/docs/add-a-sensor-to-the-manager-3) 2. [Configure Sensor information](/network-and-platform/docs/configure-sensor-information-2) 3. [Verify successful installation](/network-and-platform/docs/verify-successful-installation-2) 7. Obtain and manage NS3600 licenses: 1. Review [the license requirement for NS3600 Sensor](/network-and-platform/docs/license-requirement-for-ns3600-sensors) 2. [Manage licenses for NS3600 Sensor](/network-and-platform/docs/managing-licenses-for-ns3600-sensors) 8. After you have successfully set up and configured the Sensor: - Review the requirements in the What’s Next section - If you are experiencing any issue, refer to the Troubleshooting section or contact Trellix Support