--- title: "Getting started with NS7600 Sensor" slug: "getting-started-with-ns7600-sensor" tags: ["Hardware"] updated: 2026-09-17T09:54:41Z published: 2026-09-17T09:54:41Z canonical: "docs.trellix.com/getting-started-with-ns7600-sensor" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Getting started with NS7600 Sensor > [!NOTE] > Note > > This section provides step-by-step instructions on how to get started with NS7600 Sensor. This includes a check-list of the topics that you should review before setting up the Sensor, its physical installation steps, cabling requirements, how to install interface and transceiver modules, steps to set it up with Trellix IPS Manager, and license requirements. Trellix recommends that you go through the entire hardware guide for a better understanding of how to configure and manage the Sensor. 1. Before you start setting up the Trellix IPS NS7600 Sensor, do the following: 1. Learn about the [components of NS7600 Sensor](/network-and-platform/docs/components-of-an-ns7600-sensor) and [LED specifications](/network-and-platform/docs/sensor-leds-1) 2. Review the [safety considerations](/network-and-platform/docs/safety-considerations-1) 3. Review the [product compliance information](/network-and-platform/docs/appendix-2-ns7600-product-compliance-information) 4. Check the [Sensor technical specifications](/network-and-platform/docs/appendix-1-ns7600-sensor-technical-specifications) 5. [Verify the hardware and software requirements](/network-and-platform/docs/verify-the-hardware-and-software-requirements-1) 6. [Verify the contents in the box](/network-and-platform/docs/verify-the-contents-in-the-box-1) 2. Perform the physical installation of the Sensor: 1. [Unpack the Sensor](/network-and-platform/docs/unpack-the-sensor-2) 2. Learn [how to position the Sensor](/network-and-platform/docs/how-to-position-the-sensor-1) 3. [Install the slide rails and rack mount the Sensor](/network-and-platform/docs/install-the-slide-rails-and-rack-mount-the-sensor-1) 3. Attach required cables to the Sensor: 1. [Connect the cable to the Console port](/network-and-platform/docs/connect-the-cable-to-the-console-port-1) 2. [Connect the cable to the Response port](/network-and-platform/docs/connect-the-cable-to-the-response-port-1) 3. [Connect the cable to the Management port](/network-and-platform/docs/connect-the-cable-to-the-management-port-1) 4. [Connect cables to the Monitoring ports](/network-and-platform/docs/about-connecting-cables-to-the-monitoring-ports-1) 4. Install an Interface module: 1. Learn about the [network interface modules supported in NS7600 Sensor](/network-and-platform/docs/ns-series-interface-modules-supported-in-ns7600-sensor) > [!WARNING] > Caution > > Apart from the interface modules discussed in the topic above (that is, 6-port RJ45 10/1 Gigabit Ethernet interface module with built-in fail open and 8-port 10/1 Gigabit fiber (SM and MM) interface module with built-in fail open), no other interface modules are compatible with NS7600 Sensor. 2. Install an interface module [during a fresh installation of the Sensor](/network-and-platform/docs/install-the-interface-module-during-a-fresh-installation-of-the-sensor-1) or [on an up and running Sensor](/network-and-platform/docs/install-the-interface-module-on-an-up-and-running-sensor-1) 5. Install a transceiver module: 1. Learn about [the transceiver modules supported in NS7600 Sensor](/network-and-platform/docs/setting-up-ns7600-sensor-with-a-transceiver-module) 2. [Install a transceiver module in the Sensor](/network-and-platform/docs/remove-a-transceiver-module-1) > [!NOTE] > Note > > Transceiver modules are supported in built-in G0 slot only. 6. [Install the Trellix IPS Manager Software](/network-and-platform/docs/install-the-manager-software-1) and then set up the Sensor with the Manager: 1. [Add the Sensor to the Manager](/network-and-platform/docs/add-a-sensor-to-the-manager-2) 2. [Configure Sensor information](/network-and-platform/docs/configure-sensor-information-1) 3. [Verify successful installation](/network-and-platform/docs/verify-successful-installation-1) 7. Obtain and manage NS7600 licenses: 1. Review [the license requirement for NS7600 Sensor](/network-and-platform/docs/license-requirement-for-ns7600-sensors) 2. [Manage licenses for NS7600 Sensor](/network-and-platform/docs/managing-licenses-for-ns7600-sensors) 8. After you have successfully set up and configured the Sensor: - Review the requirements in the [What’s Next](/network-and-platform/docs/what-s-next-2) section - If you are experiencing any issue, refer to the [Troubleshooting](/network-and-platform/docs/troubleshooting-the-sensor-1) section or contact Trellix Support